PA66 A 60G1 V30·¨¹úÂÞµØÑÇTECHNYL® 30%²£ÏËÔöÇ¿×èȼÄáÁú66ËÜÁÏ£¨18024445500£©
TECHNYL® A 60G1 V30 ¡¡ ¡¡ ¡¡ ¡¡
The values of properties are for the natural grade. ¡¡ ¡¡ ¡¡ ¡¡
Properties Standards Unit Values ¡¡
¡¡ ¡¡ ¡¡ d.a.m*. Cond.**
Physical ¡¡ ¡¡ ¡¡ ¡¡
Water absorption (24 h at 23¡ãC) ISO 62 % 0.73¡¡-
Density ISO 1183-A g/cm3 1.46¡¡-
Molding Shrinkage Isotropy (Rhodia EP) RHODIA-EP ¡¡ 0.40¡¡-
Molding shrinkage normal or perpendicular (ISO 294-4) ISO 294-4 % 0.80¡¡-
Molding shrinkage Parallel (ISO 294-4) ISO 294-4 % 0.30¡¡-
Mechanical ¡¡ ¡¡ ¡¡ ¡¡
Tensile modulus ISO 527 type 1 A MPa 11700¡¡8410¡¡
Elongation at break ISO 527 type 1 A % 2.30¡¡4.20¡¡
Tensile strength at break ISO 527 type 1 A MPa 150¡¡115¡¡
Charpy notched impact strength ISO 179/1eA kJ/m2 6.70¡¡9.5¡¡
Charpy unnotched impact strength ISO 179/1eU kJ/m2 55¡¡78¡¡
Flamability ¡¡ ¡¡ ¡¡ ¡¡
Flammability UL 94 (Thickness 0,8 mm) ISO 1210/UL 94 ¡¡ V0 -
Flammability UL 94 (Thickness 1,6 mm) ISO 1210/UL 94 ¡¡ V0 -
Flammability UL 94 (Thickness 3,2 mm) ISO 1210/UL 94 ¡¡ V0 -
Glow wire flammability index (thickness = 0,8) IEC60695-2-12 ¡ãC 960¡¡-
Glow wire flammability index (thickness = 1,6) IEC60695-2-12 ¡ãC 960¡¡-
Glow wire flammability index (thickness = 3,2) IEC60695-2-12 ¡ãC 960¡¡-
Glow wire ignition temperature (thickness = 0,8) IEC60695-2-13 ¡ãC 775¡¡-
Glow wire ignition temperature (thickness = 1,6) IEC60695-2-13 ¡ãC 775¡¡-
Limit Oxygen index ISO 4589 ¡¡ 33¡¡-
Thermal ¡¡ ¡¡ ¡¡ ¡¡
Melting Temperature ISO 11357 ¡ãC 263¡¡-
Heat deflection temperature, 1,8 Mpa ISO 75/Af ¡ãC 245¡¡-
Electrical ¡¡ ¡¡ ¡¡ ¡¡
Comparative tracking index sol. A IEC60112 Volt 600¡¡- |