PA66 A 217 BLACK 1 N·¨¹úÂÞµØÑÇTECHNYLÄÍ»¯Ñ§ÐÔÄÍÈÈÐÔÄáÁú66ËÜÁÏ£¨18024445500£©
TECHNYL A 217 BLACK 1 N ¡¡ ¡¡ ¡¡ ¡¡
¡¡ ¡¡ ¡¡ Properties ¡¡
¡¡ Typical values of properties are for black grades
¡¡ Standards Unit Values ¡¡
¡¡ ¡¡ ¡¡ d.a.m. Cond.
Physical ¡¡ ¡¡ ¡¡ ¡¡
Water absorption(24h at 23¡ãC) ISO 62 % 1,30 ¡¡
Water absorption(30 min at 100¡ãC) ISO 62 % 1,50 ¡¡
Density ISO 1183/A g/cm3 1,14 ¡¡
Molding shrinkage Parallel RHODIA % 1,90 ¡¡
Molding shrinkage normal or perpendicular RHODIA % 1,90 ¡¡
Molding Shrinkage Isotropy RHODIA ¡¡ 1¡¡¡¡
Mechanical ¡¡ ¡¡ ¡¡ ¡¡
Tensile Modulus ISO 527 Type 1A MPa 3300¡¡1500¡¡
Tensile strength at yield ISO 527 Type 1A MPa 88¡¡60¡¡
¡¡ ASTM D-638 MPa 85¡¡¡¡
Tensile strength at break ISO 527 Type 1A MPa 65¡¡40¡¡
Elongation at yield ISO 527 Type 1A % 4,50 10¡¡
Elongation at break ISO 527 Type 1A % 20¡¡200¡¡
¡¡ ASTM D-638 % 30¡¡¡¡
Flexural modulus ISO 178 MPa 3100¡¡1450¡¡
¡¡ ASTM D-790 MPa 3500¡¡¡¡
Flexural maximum stress ISO 178 MPa 130¡¡80¡¡
¡¡ ASTM D-790 MPa 125¡¡¡¡
Charpy notched impact strength (23 ¡ãC) ISO 179/1eA kJ/m2 4,5 11¡¡
Charpy unnotched impact strength (23 ¡ãC) ISO 179/1eU kJ/m2 NB NB
Izod notched impact strength (23 ¡ãC) ISO 180/1A kJ/m2 4¡¡10¡¡
¡¡ ASTM D256 J/m 80¡¡¡¡
Izod unnotched impact strength ISO 180/1U kJ/m2 NB NB
Flammability ¡¡ ¡¡ ¡¡ ¡¡
Flammability (Thickness: 1,6 mm) ISO 1210 / UL94 ¡¡ V2 ¡¡
Flammability (Thickness: 3,2 mm) ISO 1210 / UL94 ¡¡ V2 ¡¡
Glow Wire Flammability Index (Thickness: 0,8 mm) ISO 60695-2-12 ¡ãC 650¡¡¡¡
Glow Wire Flammability Index (Thickness: 1,6 mm) ISO 60695-2-12 ¡ãC 650¡¡¡¡
Glow Wire Ignition Temperature (Thickness: 1,6 ISO 60695-2-13 ¡ãC 650¡¡¡¡
mm) ¡¡ ¡¡ ¡¡ ¡¡
Limit Oxygen Index ISO 4589 ¡¡ 26¡¡¡¡
Fire and Smoke index NF F 16 101 ¡¡ I3 / F2 ¡¡
Thermal ¡¡ ¡¡ ¡¡ ¡¡
Melting Temperature ISO 11357 ¡ãC 263¡¡¡¡
Heat deflection temperature (1,8 MPa) ISO 75/Af ¡ãC 75¡¡¡¡
Heat deflection temperature (1,82 MPa) ASTM D-648 ¡ãC 75¡¡¡¡
Heat deflection temperature (0,64 MPa) ASTM D-648 ¡ãC 220¡¡¡¡
Coef of Linear thermal expansion parallel (23¡ãC to ISO 11359 E-5/¡ãC 7¡¡¡¡
85¡ãC) ¡¡ ¡¡ ¡¡ ¡¡
¡¡ ASTM D-696 E-5/¡ãC 7¡¡¡¡
Electrical ¡¡ ¡¡ ¡¡ ¡¡
Comparative tracking index (Sol A) IEC 60112 V 600¡¡600¡¡
Comparative tracking index (Sol B) IEC 60112 V 450¡¡¡¡
Dielectric strength IEC 60243 kV/mm 25¡¡22¡¡
Dissipation factor IEC 60250 ¡¡ 0,030 0,080
Relative permittivity IEC 60250 ¡¡ 2,90 3,20
Surface resistivity IEC 60093 Ohm 1E 15 1E 13
Volume resistivity IEC 60093 Ohm/cm 1E 15 1E 14 |