PA6 C 218 V30法国罗地亚TECHNYL热稳定30%玻纤增强尼龙6塑料(18024445500)
Standards Unit Values
d.a.m. Cond.
Physical
Water absorption(24h at 23°C) ISO 62 % 1,05
Density ISO 1183/A g/cm3 1,36
Molding shrinkage Parallel RHODIA % 0,30
Molding shrinkage normal or perpendicular RHODIA % 0,70
Molding Shrinkage Isotropy RHODIA 0,43
Mechanical
Tensile Modulus ISO 527 Type 1A MPa 9600 6200
Tensile strength at break ISO 527 Type 1A MPa 190 110
ASTM D-638 MPa 170
Elongation at break ISO 527 Type 1A % 3,20 4,50
ASTM D-638 % 3,50
Flexural modulus ISO 178 MPa 8400 4900
ASTM D-790 MPa 8900
Flexural maximum stress ASTM D-790 MPa 255
Charpy notched impact strength (23 °C) ISO 179/1eA kJ/m2 15 31,5
Charpy unnotched impact strength (23 °C) ISO 179/1eU kJ/m2 92 105
Izod notched impact strength (23 °C) ISO 180/1A kJ/m2 14 24
ASTM D256 kJ/m2 125 |