PA66 RX03643Hɳ²®»ù´¡´´ÐÂÄÚ²¿È󻬾Ûõ£°·66ÄáÁúËÜÁÏ£¨18024445500£©
Also known as:LNP™LUBRICOMP™Compound PDX-R-03643 HC
Product reorder name:RX03643H
¡¡
LNP LUBRICOMP RX03643H is a compound based on Nylon 66 resin containing Proprietary Filler(s). Added features of this material include: Internally Lubricated.
¡¡
Property
¡¡
TYPICAL PROPERTIES (1)
MECHANICAL
Value
Unit
Standard
¡¡
Tensile Stress, yield
980
kgf/cm²
ASTM D 638
¡¡
Tensile Stress, break
980
kgf/cm²
ASTM D 638
¡¡
Tensile Strain, yield
2.4
%
ASTM D 638
¡¡
Tensile Strain, break
2.4
%
ASTM D 638
¡¡
Tensile Modulus, 50 mm/min
56200
kgf/cm²
ASTM D 638
¡¡
Flexural Modulus
49200
kgf/cm²
ASTM D 790
¡¡
Tensile Stress, yield
95
MPa
ISO 527
¡¡
Tensile Stress, break
95
MPa
ISO 527
¡¡
Tensile Strain, yield
2.3
%
ISO 527
¡¡
Tensile Strain, break
2.3
%
ISO 527
¡¡
Tensile Modulus, 1 mm/min
5310
MPa
ISO 527
¡¡
Flexural Stress
149
MPa
ISO 178
¡¡
Flexural Modulus
4500
MPa
ISO 178
¡¡
IMPACT
Value
Unit
Standard
¡¡
Izod Impact, unnotched, 23¡ãC
43
cm-kgf/cm
ASTM D 4812
¡¡
Izod Impact, notched, 23¡ãC
3
cm-kgf/cm
ASTM D 256
¡¡
Instrumented Impact Energy @ peak, 23¡ãC
70
cm-kgf
ASTM D 3763
¡¡
Multiaxial Impact
22
cm-kgf
ISO 6603
¡¡
Izod Impact, unnotched 80*10*4 +23¡ãC
28
kJ/m²
ISO 180/1U
¡¡
Izod Impact, notched 80*10*4 +23¡ãC
3
kJ/m²
ISO 180/1A
¡¡
THERMAL
Value
Unit
Standard
¡¡
HDT, 0.45 MPa, 3.2 mm, unannealed
256
¡ãC
ASTM D 648
¡¡
HDT, 1.82 MPa, 3.2mm, unannealed
238
¡ãC
ASTM D 648
¡¡
CTE, -40¡ãC to 40¡ãC, flow
4.32E-05
1/¡ãC
ASTM E 831
¡¡
CTE, -40¡ãC to 40¡ãC, xflow
7.38E-05
1/¡ãC
ASTM E 831
¡¡
CTE, -40¡ãC to 40¡ãC, flow
4.2E-05
1/¡ãC
ISO 11359-2
¡¡
CTE, -40¡ãC to 40¡ãC, xflow
7.5E-05
1/¡ãC
ISO 11359-2
¡¡
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm
252
¡ãC
ISO 75/Bf
¡¡
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm
221
¡ãC
ISO 75/Af
¡¡
PHYSICAL
Value
Unit
Standard
¡¡
Density
1.25
g/cm³
ASTM D 792
¡¡
Moisture Absorption, 50% RH, 24 hrs
0.9
%
ASTM D 570
¡¡
Mold Shrinkage, flow, 24 hrs (5)
1 - 1.2
%
ASTM D 955
¡¡
Mold Shrinkage, xflow, 24 hrs (5)
0.7 - 0.9
%
ASTM D 955
¡¡
Mold Shrinkage, flow, 24 hrs (5)
1.1
%
ISO 294
¡¡
Mold Shrinkage, xflow, 24 hrs (5)
0.79
%
ISO 294
¡¡
Wear Factor Washer
158
10^-10 in^5-min/ft-lb-hr
ASTM D 3702 Modified
¡¡
Dynamic COF
0.46
-
ASTM D 3702 Modified
¡¡
Static COF
0.37
-
ASTM D 3702 Modified
¡¡
Density
1.24
g/cm³
ISO 1183
¡¡
Source GMD, last updated:2008/09/24
Processing
Parameter
Injection Molding
Value
Unit
Drying Temperature
80
¡ãC
Drying Time
4
hrs
Maximum Moisture Content
0.15 - 0.25
%
Melt Temperature
275 - 290
¡ãC
Front - Zone 3 Temperature
295 - 305
¡ãC
Middle - Zone 2 Temperature
280 - 295
¡ãC
Rear - Zone 1 Temperature
265 - 275
¡ãC
Mold Temperature
80 - 95
¡ãC
Back Pressure
0.2 - 0.3
MPa
Screw Speed
30 - 60
rpm
Source GMD, last updated:2008/09/24
¡¡
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
¹©Ó¦µÄɳ²®»ù´¡PA66ËÜÁÏÈçÏ£º
LNP™ LUBRICOMP Compound
¡¡
Grades
Description
RA004
Internally Lubricated Nylon 66 compound containing Aramid.
RAL22
Internally Lubricated Nylon 66 compound containing Aramid, PTFE.
RAL22I
Internally Lubricated, High Impact Nylon 66 compound containing PTFE, Aramid Fiber.
RAL22S
Internally Lubricated Nylon 66 compound containing PTFE, Aramid Fiber.
RAL23
Internally Lubricated Nylon 66 compound containing Aramid Fiber, PTFE.
RAL23S
Heat Stabilized Nylon 66 compound containing Aramid Fiber, PTFE.
RCL36S
Electrically Conductive Nylon 66 compound containing Carbon Fiber, PTFE.
:
RCP36
Electrically Conductive Nylon 66 compound containing Silicone, PTFE, Carbon Fiber.
RFL16
Internally Lubricated Nylon 66 compound containing Glass Fiber, PTFE.
RFL26S
Internally Lubricated, Heat Stabilized Nylon 66 compound containing Glass Fiber, PTFE.
RFL33
Internally Lubricated Nylon 66 compound containing Glass Fiber, PTFE.
RFL34
Internally Lubricated Nylon 66 compound containing Glass Fiber, PTFE.
RFL36L
Internally Lubricated, Low Extractible Nylon 66 compound containing Glass Fiber, PTFE.
RFP36
Internally Lubricated Nylon 66 compound containing Glass Fiber, PTFE, Silicone.
RFP36XXZ
PA 66, Silicone, Lubricants, PTFE, Glass, Internally Lubricated, Wear resistant,
RN001S
Internally Lubricated, Heat Stabilized Nylon 66 compound containing MOS2.
RP003
Internally Lubricated Nylon 66 compound containing PTFE, Silicone.
RP004
Internally Lubricated Nylon 66 compound containing PTFE, Silicone.
RX01514
Internally Lubricated Nylon 66 compound containing Proprietary Filler(s).
RX03643H
Internally Lubricated Nylon 66 compound containing Proprietary Filler(s).
RX05496
Internally Lubricated Nylon 66 compound containing Glass Fiber, PTFE, Silicone.
RX06480
Internally Lubricated Nylon 66 compound containing PTFE, Glass Fiber, Silicone.
RX85514
Internally Lubricated Nylon 66 compound containing Proprietary Filler(s). |