深圳机加工车间地坪*** 400-0709-910(请拨打400-0709-910电话，永坚地坪公司)

Construction steps:
Step
1: Renovated kibble
First uneven concrete floor with a dry grinding 50 #, 150 #, 300 # Refurbishment again (such as the ground is soft can jump), and then sucked clean ground; if you need to clean the mill floor, needed to be dry.
Step
2: strong spray sealing agent
After the seal use strong drying agent was uniformly sprayed or applied to the ground, depending on the base surface density and permeability to be dry when brushing 2-3 times water wet seal, so sealer fully seep into the ground, this process for about three hours around.
Step
3: clean the surface
Wet seal three hours later, the ground surface of the seal into a sticky wet, with water with red pad clean, otherwise leave white crystals after drying.
Step
4: fine grinding
500 # will use refurbished disc mill ground smooth, dry cleaning, no drug residue, the disc and then refurbished 1000 #, 2000 #, 3000 # Refurbishment again, dry grinding required operating speed 1500 rev / min or more, after polishing Bright
Step
5: Push dust cleaning
Dust to dust by pushing net
Another: If you need a higher gloss, you can use a small amount of cream with white pad DL102 crystal grinding dry ground, which issued a diamond-clear luster.
Tools of this operation are as follows:
1, a crystal surface machine (small and medium projects) 2.5P, the big project general use: Buffalo refurbished machines
2, dry grinding: 50 #, 150 #, 300 #
3, red mat
4, refurbishment disc: 500 #, 1000 #, 2000 #, 3000 #
5, dust mop
6. For a high-gloss, required to white pad.

超硬混凝土密封固化剂是水性溶液、使用方便、**、不燃、渗透力强的**性水泥密封剂，符合VOC规则及美国农业部USDA评定。该产品针现有地坪地坪因施工不良，不耐磨耗，而产生起砂之而研制。直接喷涂于地坪面层，达到改善起砂及耐磨效果。使用方便，同时不影响使用原有地坪。 改善表面基材之各类物理强度。提升化学抵抗性，抗风化。 增加水密性，及加大砂浆表面强度。 实地检验证明可用20年以上。
说明：
1．能深度渗透地坪并使其表面产生特殊硬化效果的无色、无味、**的液体。
2．在地坪表面内部产生化学反应。
3．在硅元素以及氟化物的作用下，地坪中的自由状态石灰离子会形成具有花岗岩般坚硬的结晶物，从而得到一个无尘、致密的整体，**提高地坪表面的强度、密度、耐磨性。
用途：
1． 仓库、体育中心、食品制造车间。室内外公里马路，港口码头。
2． 工厂、计算机房、医院
3． 大型超市、停车场、学校
4.适用于中等荷载的工业地坪,如:车库、机械 、车间、厂房、药厂地面、耐磨地坪、水泥地面医院、GMP药厂、食品厂、电子厂、实验室等

资讯来源：<联系:400-0709-910>