PA66 FR70M30V0 BK010美国杜邦Zytel® 30%矿物增强阻燃聚酰胺66尼龙塑料（18024445500）

Zytel® FR70M30V0 BK010 is a 30% mineral reinforced, flame retardant polyamide 66 resin for injection molding.
General information Value Unit Test Standard
Resin Identification PA66-MD30FR(17) - -
Part Marking Code >PA66-MD30FR(17) - ISO 11469
　 < 　 　
Rheological properties dry / cond Unit Test Standard
Moulding shrinkage, parallel 0.8 / * % ISO 294-4, 2577
Moulding shrinkage, normal 0.9 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 6200 / 4000 MPa ISO 527-1/-2
Stress at break 65 / 45 MPa ISO 527-1/-2
Strain at break 2 / 3.5 % ISO 527-1/-2
Charpy impact strength, 23°C 20 / 25 kJ/m² ISO 179/1eU
Charpy notched impact strength, 23°C 2.5 / 2.5 kJ/m² ISO 179/1eA
Izod notched impact strength, 23°C 2 / 2.5 kJ/m² ISO 180/1A
Thermal properties dry / cond Unit Test Standard
Melting temperature, 10°C/min 263 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.8 MPa 145 / * °C ISO 75-1/-2
RTI, electrical 　 　 UL 746B
0.75 mm 105 / * °C 　
1.5mm 120 / * °C 　
3mm 120 °C 　
RTI, impact 　 　 UL 746B
0.75 mm 95 °C 　
1.5mm 105 / * °C 　
3mm 115 °C 　
RTI, strength 　 　 UL 746B
0.75 mm 105 °C 　
1.5mm 115 / * °C 　
3mm 115 °C 　
Flammability dry / cond Unit Test Standard
Burning Behav. at 1.5mm nom. thickn. V-0 / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h V-2 / * class IEC 60695-11-10
Thickness tested 0.75 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. 5V at thickness h 5VA / * class IEC 60695-11-20
Thickness tested 1.5 / * mm IEC 60695-11-20
UL recognition UL / * - -
Glow Wire Flammability Index 　 　 IEC 60695-2-1/2
0.75mm 960 / - °C 　
1.5mm 960 / - °C 　
3mm 960 / - °C 　
Glow Wire Ignition Temperature 　 　 IEC 60695-2-1/3
0.75mm 800/- °C 　
1mm 800/- °C 　
1.5mm 800/- °C 　
3mm 800/- °C 　
Flammability, 3.0mm V-0/* - IEC 60695-11-10
Electrical properties dry/cond Unit Test Standard
CTI, 23°C 　 　 UL 746A
1.5mm 2/- PLC 　
3.0mm 2/- PLC 　
0.75mm 2/- PLC 　
Other properties dry/cond Unit Test Standard
Density 1620/- kg/m³ ISO 1183